2022 HPE2-T37 Dumps PDF - HPE2-T37 Real Exam Questions Answers
Valid HPE2-T37 Test Answers & HP HPE2-T37 Exam PDF
NEW QUESTION 14
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- B. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
- C. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
- D. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
10 Compute Modules are installed in the frame.
Answer: D
NEW QUESTION 15
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Logical enclosure support dump
- B. Appliance support dump
- C. Firmware deployment support dump
- D. Enclosure group support dump
- E. Maintenance console support dump
Answer: A,E
NEW QUESTION 16
Which statement about a server profile for an Apollo system is true?
- A. UEFI optimized is the only available boot mode
- B. Enclosure Group Is automatically selected
- C. Fibre Channel connections can be defined
- D. Virtual WWNs and MAC addresses can be defined
Answer: D
NEW QUESTION 17
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. HPE Management Agent must he installed for for HPE ProLiant Gen 10 servers.
- B. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
- C. Not all of the features will be available for HPE ProLiant G7 systems.
- D. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
Answer: B
NEW QUESTION 18
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
- B. The maximum supported number of the internal networks for logical interconnect is configured.
- C. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- D. For FC uplink sets, an additional uplink from second module should be added for redundancy.
Answer: A
NEW QUESTION 19
What is a network set?
- A. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
- B. It is a collection of all networks configured within HPE OneView regardless of network type.
- C. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
- D. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
Answer: D
NEW QUESTION 20
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.
Answer:
Explanation:
NEW QUESTION 21
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As a virtual appliance running on the supported hypervisor.
- B. As an application running on the server with CentOS Linux system
- C. As an application running on the server with Windows system.
- D. As a physical appliance based on HPE ProLiant 360 Gen 10.
Answer: D
NEW QUESTION 22
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Enclosure
- B. Logical Interconnect Group
- C. Server Profile
- D. Logical Interconnect
Answer: A
NEW QUESTION 23
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Snapshot functionality will be limited only to the volumes not using these SANs.
- B. Volume presentation through server profile will work with the discovered state.
- C. Volume provisioning will only work for arrays that ate accessible through these SANs.
- D. Auto-zoning functionality will not work until SANs are associated with networks.
Answer: B
NEW QUESTION 24
Which statement about M-LAG setup is true?
- A. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
- B. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.
- C. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
- D. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
Answer: C
NEW QUESTION 25
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- B. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- C. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- D. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
Answer: C
NEW QUESTION 26
Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within Logical Interconnect Group and update all servers.
- B. Set a specific workload profile within server profile template and update all profiles.
- C. Set a specific workload profile for all managed servers as an HPE OneView global setting.
- D. Set a specific workload profile using IL0 interface for each individual server.
Answer: C
NEW QUESTION 27
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses to IL0 and interconnect modules if applicable
- B. to provide static IP addresses for storage systems managed in HPE OneView
- C. to provide static IP addresses for an operating system running on a Compute Module
- D. to provide static IP addresses for Logical Interconnects and Logical Enclosures
Answer: C
NEW QUESTION 28
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. Changes to the server profile were implemented directly on the server profile.
- B. HPE OneView was restored from a backup that created ^consistency with the server profile template.
- C. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- D. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
Answer: C
NEW QUESTION 29
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?
- A. whether the appropriate license for HPE Primera Is available in HPE OneView.
- B. whether WSAPI service is enabled on HPE Primera array.
- C. whether array management using HPE OneView is enabled in SSMC.
- D. whether there are at least two Fibre Channel networks defined in HPE OneView.
Answer: B
NEW QUESTION 30
......
HPE2-T37 Exam Dumps - PDF Questions and Testing Engine: https://www.lead2passexam.com/HP/valid-HPE2-T37-exam-dumps.html
Realistic HPE2-T37 Exam Dumps with Accurate & Updated Questions: https://drive.google.com/open?id=1dMLNEwoGTFnPrfUW0GGcrWMU8YKRd3ot