2024 Latest 100% Exam Passing Ratio - D-PSC-MN-01 Dumps PDF
Pass Exam With Full Sureness - D-PSC-MN-01 Dumps with 142 Questions
NEW QUESTION # 12
When setting up internal networking for a PowerScale cluster, what is a crucial requirement?
- A. Private interconnects between nodes
- B. Public IP addresses for all nodes
- C. Serial connection between nodes
- D. Unrestricted internet access
Answer: A
NEW QUESTION # 13
A Dell PowerScale Gen 6 chassis is being installed. The chassis has been aligned with the rails.
What is the correct order of steps to finish the installation?
- A. 1. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
2. Push the node off the lift arms and into the rack.
3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Secure the lift casters on the floor. - B. 1. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
3. Secure the lift casters on the floor.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Push the node off the lift arms and into the rack. - C. 1. Secure the lift casters on the floor.
2. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
3. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
4. Push the node off the lift arms and into the rack.
5. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack. - D. 1. Push the node off the lift arms and into the rack.
2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Secure the lift casters on the floor.
Answer: C
NEW QUESTION # 14
When preparing a site for PowerScale installation, which of the following considerations are crucial?
(Select two)
- A. Ensuring that the flooring is anti-static
- B. Confirming that data center staff are trained on PowerScale hardware
- C. Preparing an emergency evacuation plan specific to the data center
- D. Verifying environmental controls are within recommended parameters
Answer: A,D
NEW QUESTION # 15
A platform engineer needs to replace the fan on Dell PowerScale Gen 6 hardware.
Where can they find the fan module?
- A. Compute module
- B. Suitcase
- C. Front panel
- D. Midplane
Answer: A
NEW QUESTION # 16
A Dell PowerScale platform engineer has executed the shutdown command on a three-node cluster.
The shutdown sequence displays an error and appears unresponsive.
How should the platform engineer address this issue?
- A. Contact Dell Technical Support for assistance.
- B. Hold the power button down until the node completes shutdown.
- C. Remove power cables separately, waiting at least five seconds between removing each of them.
- D. Execute a hardware shutdown by pressing the power button three times within five seconds.
Answer: A
NEW QUESTION # 17
A platform engineer plans to set up a rack system for a Dell PowerScale cluster installation.
What is a requirement for the initial setup?
- A. Power cords must be connected to four power distribution units within the rack cabinet.
- B. The rack cabinet must have at least dual power supplies with power distribution.
- C. The rack system must have twelve independent 200-240 V power sources.
- D. Grounding lugs must be used for internal grounding within the chassis.
Answer: B
NEW QUESTION # 18
What phase is crucial in the initial setup of a PowerScale cluster to ensure successful installation and deployment?
- A. Implementing cluster management tools
- B. Assessing network infrastructure
- C. Configuring data protection levels
- D. Validating hardware and software compatibility
Answer: D
NEW QUESTION # 19
What considerations should be made when applying upgrades or patches to a PowerScale cluster?
- A. Ensuring compatibility with existing applications
- B. Verifying the integrity of the upgrade package
- C. Backing up configuration and data
- D. All of the above
Answer: D
NEW QUESTION # 20
The SolVe Desktop tool is used in PowerScale environments primarily for what purpose?
- A. Facilitating troubleshooting and diagnostics
- B. Guiding through installation and maintenance processes
- C. Assisting in cluster expansion planning
- D. Monitoring real-time performance metrics
Answer: B
NEW QUESTION # 21
What are the essential phases in the PowerScale installation process?
- A. Validation and testing
- B. Networking and configuration
- C. Data migration
- D. Planning and sizing
Answer: A,B,D
NEW QUESTION # 22
A company is adding A200 nodes that have 10GigE back-end ports into their existing Dell PowerScale cluster of H500 nodes with 40GigE back-end ports. A platform engineer is asked to install the new nodes.
What is a consideration for the back-end network in a mixed cluster?
- A. PowerScale nodes with different back-end speeds cannot be connected to the same back-end switch
- B. Connecting PowerScale nodes with different back-end speeds to the same back-end switch is only possible if the backend is InfiniBand
- C. Connecting PowerScale nodes with different back-end speeds to the same back-end switch is only supported using breakout cables
- D. PowerScale nodes with different back-end speeds can connect to the same back-end switch
Answer: D
NEW QUESTION # 23
Which components are considered key Field Replaceable Units (FRUs) in PowerScale nodes?
(Select two)
- A. Hard drives
- B. Network cards
- C. Cooling fans
- D. Power supplies
Answer: A,D
NEW QUESTION # 24
What distinctive feature does PowerScale Gen 6.5 offer compared to Gen 6 nodes?
- A. Reduced power consumption
- B. Enhanced data deduplication capabilities
- C. Higher storage density
- D. Legacy networking support
Answer: C
NEW QUESTION # 25
Which Dell online service platform is used to access trusted, best-practice, guided instructions for common service tasks such as product installations, upgrades, and troubleshooting?
- A. SolVe
- B. SupportAssist
- C. MyService360
- D. TechDirect
Answer: A
NEW QUESTION # 26
Which cluster management tool provides a graphical user interface for PowerScale clusters?
- A. CLI
- B. WebUI
- C. PAPI
- D. Serial Console
Answer: B
NEW QUESTION # 27
What is the best practice for managing versioning and patches in a PowerScale cluster?
- A. Testing updates in a non-production environment
- B. Regularly reviewing available updates for compatibility
- C. Maintaining a consistent patch level across all nodes
- D. Applying patches during off-peak hours to minimize impact
Answer: C
NEW QUESTION # 28
An organization plans to add H600 nodes to a Dell PowerScale cluster. The machine room is only equipped with 120V power supplies.
What is a consideration for the platform engineer?
- A. Generation 6 PowerScale nodes require high-line power.
- B. Additional space is required for transformers in this environment.
- C. H600 nodes can operate normally in this environment.
- D. In this environment, each chassis can accommodate only two nodes.
Answer: B
NEW QUESTION # 29
What is a crucial preliminary task before performing any hardware maintenance on a PowerScale cluster?
- A. Disabling access to user shares
- B. Verifying the cluster's data integrity
- C. Checking for hardware warranty coverage
- D. Ensuring all software applications are stopped
Answer: B
NEW QUESTION # 30
Refer to the exhibit.
A platform engineer has connected power cables to a Dell PowerScale Gen 6 node.
What do the status lights indicate?
- A. On and healthy
- B. Not functioning
- C. Warning event
- D. Cold and redundant
Answer: C
NEW QUESTION # 31
......
Verified D-PSC-MN-01 dumps Q&As - 100% Pass from Lead2PassExam: https://www.lead2passexam.com/EMC/valid-D-PSC-MN-01-exam-dumps.html
Pass D-PSC-MN-01 Exam in First Attempt Guaranteed 2024 Dumps: https://drive.google.com/open?id=1KMaTSNQtcSkQiueazsldOEWWO8BfBsSD