[Apr 10, 2023] NSE4_FGT-7.0 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Pass NSE4_FGT-7.0 Exam - Real Test Engine PDF with 175 Questions
NEW QUESTION # 15
Examine the IPS sensor configuration shown in the exhibit, and then answer the question below.
An administrator has configured the WINDOWS_SERVERS IPS sensor in an attempt to determine whether the influx of HTTPS traffic is an attack attempt or not. After applying the IPS sensor, FortiGate is still not generating any IPS logs for the HTTPS traffic.
What is a possible reason for this?
- A. The IPS filter is missing the Protocol: HTTPS option.
- B. A DoS policy should be used, instead of an IPS sensor.
- C. A DoS policy should be used, instead of an IPS sensor.
- D. The firewall policy is not using a full SSL inspection profile.
- E. The HTTPS signatures have not been added to the sensor.
Answer: D
NEW QUESTION # 16
Refer to the exhibit.
According to the certificate values shown in the exhibit, which type of entity was the certificate issued to?
- A. A user
- B. A root CA
- C. A subordinate
- D. A bridge CA
Answer: A
NEW QUESTION # 17
Refer to the exhibit.
The exhibit contains a network diagram, virtual IP, IP pool, and firewall policies configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP address 10 .0.1.254. /24.
The first firewall policy has NAT enabled using IP Pool.
The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT the internet traffic coming from a workstation with the IP address 10.0.1.10?
- A. 10.200.1.1
- B. 10.200.3.1
- C. 10.200.1.10
- D. 10.200.1.100
Answer: D
NEW QUESTION # 18
Why does FortiGate Keep TCP sessions in the session table for several seconds, even after both sides (client and server) have terminated the session?
- A. To finish any inspection operations
- B. To remove the NAT operation
- C. To generate logs
- D. To allow for out-of-order packets that could arrive after the FIN/ACK packets
Answer: D
Explanation:
TCP provides the ability for one end of a connection to terminate its output while still receiving data from the other end. This is called a half-close. FortiGate unit implements a specific timer before removing an entry in the firewall session table.
NEW QUESTION # 19
Which three authentication timeout types are availability for selection on FortiGate? (Choose three.)
- A. Idle-timeout
- B. soft-timeout
- C. hard-timeout
- D. auth-on-demand
- E. new-session
Answer: A,C,E
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD37221
NEW QUESTION # 20
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode?
- A. It limits the scope of application control to scan application traffic using parent signatures only
- B. It limits the scope of application control to scan application traffic based on application category only.
- C. It limits the scope of application control to scan application traffic on DNS protocol only.
- D. It limits the scope of application control to the browser-based technology category only.
Answer: B
NEW QUESTION # 21
When configuring a firewall virtual wire pair policy, which following statement is true?
- A. Any number of virtual wire pairs can be included in each policy, regardless of the policy traffic direction settings.
- B. Exactly two virtual wire pairs need to be included in each policy.
- C. Any number of virtual wire pairs can be included, as long as the policy traffic direction is the same.
- D. Only a single virtual wire pair can be included in each policy.
Answer: C
NEW QUESTION # 22
Examine the IPS sensor configuration shown in the exhibit, and then answer the question below.
An administrator has configured the WINDOWS_SERVERS IPS sensor in an attempt to determine whether the influx of HTTPS traffic is an attack attempt or not. After applying the IPS sensor, FortiGate is still not generating any IPS logs for the HTTPS traffic.
What is a possible reason for this?
- A. The IPS filter is missing the Protocol: HTTPS option.
- B. A DoS policy should be used, instead of an IPS sensor.
- C. A DoS policy should be used, instead of an IPS sensor.
- D. The firewall policy is not using a full SSL inspection profile.
- E. The HTTPS signatures have not been added to the sensor.
Answer: D
NEW QUESTION # 23
Refer to the exhibit showing a debug flow output.
Which two statements about the debug flow output are correct? (Choose two.)
- A. A new traffic session is created.
- B. The debug flow is of ICMP traffic.
- C. A firewall policy allowed the connection.
- D. The default route is required to receive a reply.
Answer: A,B
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.2.3/cookbook/54688/debugging-the-packet-flow
NEW QUESTION # 24
Which of the following SD-WAN load -balancing method use interface weight value to distribute traffic?
(Choose two.)
- A. Source IP
- B. Volume
- C. Spillover
- D. Session
Answer: B,D
Explanation:
Explanation
https://docs.fortinet.com/document/fortigate/6.0.0/handbook/49719/configuring-sd-wan-load-balancing
NEW QUESTION # 25
If the Services field is configured in a Virtual IP (VIP), which statement is true when central NAT is used?
- A. The Services field is used when you need to bundle several VIPs into VIP groups.
- B. The Services field removes the requirement to create multiple VIPs for different services.
- C. The Services field prevents multiple sources of traffic from using multiple services to connect to a single
- D. The Services field prevents SNAT and DNAT from being combined in the same policy.
Answer: B
NEW QUESTION # 26
An administrator needs to increase network bandwidth and provide redundancy.
What interface type must the administrator select to bind multiple FortiGate interfaces?
- A. Software Switch interface
- B. VLAN interface
- C. Aggregate interface
- D. Redundant interface
Answer: C
NEW QUESTION # 27
Which two protocols are used to enable administrator access of a FortiGate device? (Choose two.)
- A. SSH
- B. HTTPS
- C. FortiTelemetry
- D. FTM
Answer: A,B
NEW QUESTION # 28
Exhibit:
Refer to the exhibit to view the authentication rule configuration In this scenario, which statement is true?
- A. Route-based authentication is enabled
- B. IP-based authentication is enabled
- C. Policy-based authentication is enabled
- D. Session-based authentication is enabled.
Answer: D
NEW QUESTION # 29
Refer to the exhibit.
In the network shown in the exhibit, the web client cannot connect to the HTTP web server. The administrator runs the FortiGate built-in sniffer and gets the output as shown in the exhibit.
What should the administrator do next to troubleshoot the problem?
- A. Execute another sniffer in the FortiGate, this time with the filter "host 10.0.1.10"
- B. Capture the traffic using an external sniffer connected to port1.
- C. Execute a debug flow.
- D. Run a sniffer on the web server.
Answer: C
NEW QUESTION # 30
Which statement about the policy ID number of a firewall policy is true?
- A. It defines the order in which rules are processed.
- B. It is required to modify a firewall policy using the CLI.
- C. It represents the number of objects used in the firewall policy.
- D. It changes when firewall policies are reordered.
Answer: B
NEW QUESTION # 31
Refer to the exhibit.
Given the routing database shown in the exhibit, which two statements are correct? (Choose two.)
- A. The port3 default route has the highest distance.
- B. The port3 default route has the lowest metric.
- C. There will be eight routes active in the routing table.
- D. The port1 and port2 default routes are active in the routing table.
Answer: A,D
NEW QUESTION # 32
......
Fortinet NSE4_FGT-7.0 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
The Fortinet NSE4_FGT-7.0 (Fortinet NSE 4 - FortiOS 7.0) Certification Exam is a comprehensive test designed to validate the knowledge and skills of network security professionals in deploying and managing Fortinet security solutions. The exam covers a wide range of topics, including network security concepts, firewall policies, VPNs, user authentication, and Fortinet's FortiGate firewalls. It is designed for individuals who are seeking to enhance their skills and knowledge in network security and become certified Fortinet NSE 4 professionals.
Get New NSE4_FGT-7.0 Certification Practice Test Questions Exam Dumps: https://www.lead2passexam.com/Fortinet/valid-NSE4_FGT-7.0-exam-dumps.html
Real NSE4_FGT-7.0 Exam Dumps Questions Valid NSE4_FGT-7.0 Dumps PDF: https://drive.google.com/open?id=1gyJzHT8DxNjB6b0gLZ7g2EPf-fqS0rgd