CompTIA N10-008 Exam Preparation Guide and PDF Download
Verified & Correct N10-008 Practice Test Reliable Source Mar 25, 2023 Updated
How to become CompTIA N10-008 certified?
Candidates who obtain their CompTIA Network+ certification have the knowledge required to:
Configure and support network components along with implementing and designing functional networks
Use testing tools and perform diagnostic routines to identify network problems
Resolve interoperability issues to support multiple applications/services on a network
Install and maintain network facilities in compliance with specifications
How to Register for the CompTIA N10-008 Certification
To register for the CompTIA N10-008 exam:
- You'll want to visit the Pearson VUE website
- If you don't have an account yet, click on “Create a web account.”
- Once you've created an account or logged in, you'll be able to schedule your exam date and time.
- Click at the top right of the screen to Schedule this exam at the top right of the screen. You'll have to log into Pearson VUE or create an account if you don't have one already.
- Enter your personal information and create a username and password to get started with your order.
NEW QUESTION 253
An IT organization needs to optimize speeds for global content distribution and wants to reduce latency in high-density user locations. Which of the following technologies BEST meets the organization's requirements?
- A. Public cloud
- B. Load balancing
- C. Infrastructure as a service
- D. Geofencing
- E. Content delivery network
Answer: E
NEW QUESTION 254
Which of the following records can be used to track the number of changes on a DNS zone?
- A. SOA
- B. NS
- C. SRV
- D. PTR
Answer: A
NEW QUESTION 255
An employee working in a warehouse facility is experiencing interruptions in mobile applications while walking around the facility. According to a recent site survey, the WLAN comprises autonomous APs that are directly connected to the internet, providing adequate signal coverage. Which of the following is the BEST solution to improve network stability?
- A. Verify that the level of EIRP power settings is set to the maximum permitted by regulations.
- B. Ensure all APs of the warehouse support MIMO and Wi-Fi 4.
- C. Implement client roaming using an extended service deployment employing a wireless controller.
- D. Remove omnidirectional antennas and adopt a directional bridge.
Answer: C
NEW QUESTION 256
Which of the following documents would be used to define uptime commitments from a provider, along with details on measurement and enforcement?
- A. SLA
- B. AUP
- C. MOU
- D. NDA
Answer: A
NEW QUESTION 257
Which of the following attack vectors represents a large number of devices sending access requests to a website, making it unavailable to respond?
- A. Botnet
- B. DOoS
- C. Virus
- D. ARP spooling
Answer: B
NEW QUESTION 258
Which of the following is the LARGEST MTU for a standard Ethernet frame?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 259
An ARP request is broadcasted and sends the following request.
''Who is 192.168.1.200? Tell 192.168.1.55''
At which of the following layers of the OSI model does this request operate?
- A. Application
- B. Transport
- C. Data link
- D. Network
- E. Session
Answer: C
NEW QUESTION 260
A technician is deploying a new SSID for an industrial control system. The control devices require the network to use encryption that employs TKIP and a symmetrical password to connect. Which of the following should the technician configure to ensure compatibility with the control devices?
- A. WPA2-Enterprise
- B. WPA-Enterprise
- C. WPA-PSK
- D. WPA2-PSK
Answer: C
Explanation:
"WPA uses Temporal Key Integrity Protocol (TKIP) for enhanced encryption. TKIP uses RC4 for the encryption algorithm, and the CompTIA Network+ exam may reference TKIP-RC4 in a discussion of wireless."
" WPA2 uses Counter Mode with Cipher Block Chaining Message Authentication Code Protocol (CCMP) for integrity checking and Advanced Encryption Standard (AES) for encryption. On the Network+ exam, you might find this referenced as simply CCMP-AES"
NEW QUESTION 261
You are tasked with verifying the following requirements are met in order to ensure network security.
Requirements:
Datacenter
Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage Provide a dedicated server to resolve IP addresses and hostnames correctly and handle port 53 traffic Building A Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage Provide devices to support 5 additional different office users Add an additional mobile user Replace the Telnet server with a more secure solution Screened subnet Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage Provide a server to handle external 80/443 traffic Provide a server to handle port 20/21 traffic INSTRUCTIONS Drag and drop objects onto the appropriate locations. Objects can be used multiple times and not all placeholders need to be filled.
Available objects are located in both the Servers and Devices tabs of the Drag & Drop menu.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
Top left subnet - 206.208.134.0/28
Top right subnet - 10.72.63.0/28
Bottom subnet - 192.168.11.0/28
Screened Subnet devices - Web server, FTP server
Building A devices - SSH server top left, workstations on all 5 on the right, laptop on bottom left DataCenter devices - DNS server.
NEW QUESTION 262
Which of the following BEST describes a network appliance that warns of unapproved devices that are accessing the network?
- A. IDS
- B. AP
- C. Proxy server
- D. Firewall
Answer: A
NEW QUESTION 263
Which of the following connector types would have the MOST flexibility?
- A. BNC
- B. LC
- C. SFP
- D. RJ45
Answer: C
NEW QUESTION 264
A network client is trying to connect to the wrong TCP port. Which of the following responses would the client MOST likely receive?
- A. ICMP Time Exceeded
- B. Redirect
- C. RST
- D. FIN
Answer: A
NEW QUESTION 265
A technician knows the MAC address of a device and is attempting to find the device's IP address. Which of the following should the technician look at to find the IP address? (Select TWO).
- A. IP route table
- B. DNS cache
- C. ARP table
- D. STP topology
- E. DHCP leases
- F. MAC address table
Answer: E,F
NEW QUESTION 266
During a recent security audit, a contracted penetration tester discovered the organization uses a number of insecure protocols. Which of the following ports should be disallowed so only encrypted protocols are allowed? (Select TWO).
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
- F. 5
Answer: C,E
NEW QUESTION 267
A technician is contracted to install a redundant cluster of devices from the ISP In case of a hardware failure within the network. Which of the following would provide the BEST redundant solution in Layer 2 devices?
- A. Multiple switches
- B. Multiple firewalls
- C. Multiple budges
- D. Multiple routers
Answer: A
NEW QUESTION 268
A company with multiple routers would like to implement an HA network gateway with the least amount of downtime possible. This solution should not require changes on the gateway setting of the network clients. Which of the following should a technician configure?
- A. Automate a continuous backup and restore process of the system's state of the active gateway.
- B. Use a static assignment of the gateway IP address on the network clients.
- C. Configure DHCP relay and allow clients to receive a new IP setting.
- D. Configure a shared VIP and deploy VRRP on the routers.
Answer: D
NEW QUESTION 269
During the troubleshooting of an E1 line, the point-to-point link on the core router was accidentally unplugged and left unconnected for several hours. However, the network management team was not notified. Which of the following could have been configured to allow early detection and possible resolution of the issue?
- A. Traps
- B. Baselines
- C. MIB
- D. OID
Answer: A
NEW QUESTION 270
A technician is trying to determine whether an LACP bundle is fully operational. Which of the following commands will the technician MOST likely use?
- A. show interface
- B. show config
- C. how route
- D. show arp
Answer: A
NEW QUESTION 271
A network technician is performing tests on a potentially faulty network card that is installed in a server. Which of the following addresses will MOST likely be used during traffic diagnostic tests?
- A. 192.168.0.1
- B. 10.10.10.10
- C. 255.255.255.0
- D. 127.0.0.1
Answer: B
NEW QUESTION 272
A user is having difficulty with video conferencing and is looking for assistance. Which of the following would BEST improve performance?
- A. Packet shaping
- B. Load balancing
- C. Port mirroring
- D. Quality of service
Answer: D
NEW QUESTION 273
Which of the following needs to be tested to achieve a Cat 6a certification for a company's data cawing?
- A. F-type connector
- B. LC ports
- C. Patch panel
- D. RJ11
Answer: D
NEW QUESTION 274
During a risk assessment which of the following should be considered when planning to mitigate high CPU utilization of a firewall?
- A. Recovery time objective
- B. Load balancing
- C. NIC teaming
- D. Uninterruptible power supply
Answer: B
NEW QUESTION 275
A technician is writing documentation regarding a company's server farm. The technician needs to confirm the server name for all Linux servers. Which of the following commands should the technician run?
- A. ipconfig
- B. route
- C. arp
- D. nslookup
Answer: D
NEW QUESTION 276
A technician performed a manual reconfiguration of a firewall, and network connectivity was reestablished. Some connection events that were previously sent to a syslog server are no longer being generated by the flrewal Which of Vie following should the technician perform to fix the Issue?
- A. Tune the filter for logging the severity level on the syslog server.
- B. Adjust the proper logging level on the new firewall.
- C. Activate NetFlow traffic between the syslog server and the firewall
- D. Restart the SNMP service running on the syslog server.
Answer: B
NEW QUESTION 277
Which of the following would be the BEST choice to connect branch sites to a main office securely?
- A. Proxy server
- B. Load balancer
- C. VPN headend
- D. Bridge
Answer: C
NEW QUESTION 278
......
The best way to study for a CompTIA N10-008 Exam is by getting as many practice questions as possible
The best way to study for a CompTIA N10-008 Exam is by getting as many practice questions as possible. The more practice questions you go through, the better prepared you will be when you finally sit down to take your exam. A lot of people don't realize that this is the key to passing the exam, and they end up having to retake it over again because they didn't realize what it takes to pass. This is the reason why the exam is given in multiple choice format, so that you have multiple chances of answering correctly. If you can't seem to get any of the questions right, then there's a good chance that your answers are wrong, and if you aren't taking enough time with each question then you won't have enough time left over for all of them. CompTIA N10-008 Dumps are good choice for you.
The other thing that makes multiple choice exams so difficult is that there are a lot of different ways to get them wrong, which means that there are a lot of different ways to get them right too. So while you might be able to memorize every answer in order to answer your first question correctly, there's no guarantee that you'll be able to recall them later on when you're taking the next one.
Pass CompTIA N10-008 exam Dumps 100 Pass Guarantee With Latest Demo: https://www.lead2passexam.com/CompTIA/valid-N10-008-exam-dumps.html
Free CompTIA N10-008 Exam Files Downloaded Instantly: https://drive.google.com/open?id=1mpP-604nIHIVH6qFPaaX2C9LamysozRC