Full 1Z0-996-20 Practice Test and 72 unique questions with explanations waiting just for you!
Oracle Utilities Customer Cloud Dumps 1Z0-996-20 Exam for Full Questions - Exam Study Guide
NEW QUESTION 40
Which relationship must be established with an external system or a service provider before creating bill determinants?
- A. Usage Factor
- B. Usage Transaction
- C. Usage Subscription
- D. Usage Rule
Answer: C
NEW QUESTION 41
Which two are "Are SP and Device Ready?" state algorithms for Enable Service? (Choose two.)
- A. Check for Measurement
- B. Start Service Agreement
- C. Customer Device Compatibility Check
- D. Create Service Point
- E. Create Usage Subscription
Answer: A,C
NEW QUESTION 42
Which three statements are true about the different types of measuring components? (Choose three.)
- A. Seconds-per-interval (SPI) is one of the attributes of scalar measuring components.
- B. The measuring component types are physical, standalone, scratchpad, and TOU.
- C. Only physical measuring components reference a device configuration.
- D. Scalar measuring components contain a single measurement for an arbitrary period of time.
- E. The terms register and channel are synonyms for measuring component.
Answer: B,D,E
NEW QUESTION 43
Your client has the following requirements:
Many customers are installing their own solar electrical generation equipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.
In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid. Both reads will be stored in kWh, but the import is subtractive and export is consumptive.
What solution should you choose to configure the measuring component types for these specific requirements?
- A. Create two service points: one for subtractive import and the other for consumptive export.
- B. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.
- C. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).
- D. Create two new measuring component types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.
Answer: D
NEW QUESTION 44
What can cause multiple bill lines for a rate component to be produced in a bill calculation header?
- A. change in Bill Factor
- B. changes in Rate Schedule and Bill Factor
- C. changes in Rate Version Calculation Group and Bill Factor
- D. change in Rate Version Calculation Group
- E. change in Rate Schedule
Answer: B
NEW QUESTION 45
Your implementation requires an installation of two types of devices:
Electric Smart Meter
Gas Manual Meter
Which two Device Type attributes are required to identify these device types? (Choose two.)
- A. Service Type
- B. Device Business Object
- C. Valid Measuring Component Types
- D. Serial Number
- E. Manufacturer
Answer: A,C
NEW QUESTION 46
The base package usage transaction business object is represented by D2-UsageTransaction. The usage calculation engine or process drives the specifics of the usage to be calculated on this business object.
Based on this, which three configuration areas will have an impact on the usage calculation process? (Choose three.)
- A. Usage Rule
- B. Factor Override
- C. TOU map
- D. VEE rule
Answer: A,B,C
NEW QUESTION 47
Critical validation rules verify the integrity of the initial measurement data (IMD). If an implementation needs to add new critical validations, where would you configure them?
- A. in the schema of the IMD Seeder BO (D1-IMDSeeder)
- B. as options on the IMD Seeder BO (D1-IMDSeeder)
- C. in the pre-processing algorithm of the IMD Seeder BO (Dl-IMDSeeder)
- D. in the validation algorithm on the IMD Seeder BO (D1-IMDSeeder)
- E. as new lifecycle algorithms on the IMD Seeder BO (D1-IMDSeeder)
Answer: C
NEW QUESTION 48
Throughout its lifecycle, an asset's disposition changes as it is moved between locations and service statuses.
Which are valid asset dispositions?
- A. In Receipt; Installed; In Stores; Retired
- B. In Receipt; In Field; In Stores; Retired
- C. Receiving; Installed; Storage; Retired
- D. Receiving; In Field; Storage; Retired
Answer: B
NEW QUESTION 49
When you cancel a payment, what will the system automatically do?
- A. cancel all tenders associated with the payment
- B. generate a new Financial Transaction to reverse the original Financial Transaction
- C. impact the credit rating
- D. charge a NSF Fee for the payment cancellation
Answer: D
NEW QUESTION 50
Within the application, operational devices can be assets or components.
Which two statements are true about components? (Choose two.)
- A. Components can be installed at locations.
- B. Components have a disposition that tracks their location and status.
- C. Components are attached to assets.
- D. Components are not a class of assets.
- E. Components can't have specifications.
Answer: A,C
NEW QUESTION 51
Which configuration steps are required to derive loss-adjusted kWh on a measuring component based on a loss factor value related to a service point?
- A. Configure a Service Point Characteristic Type, factor, derivation algorithm, and Service Quantity Identifier (SQI), and then associate the SQI and derivation algorithm to the Measuring Component Type and the characteristic value to the service point.
- B. Configure a factor and derivation algorithm, and then associate the factor to the Measuring Component Type and the derivation algorithm to the service point.
- C. Configure an SQI and the derivation algorithm, and then associate the algorithm to the Measuring Component Type and SQI to the service point.
- D. Configure a Service Point Characteristic Type and derivation algorithm, and then associate the algorithm to the Measuring Component Type and the characteristic value to the service point.
- E. Configure a factor and derivation algorithm, and then associate both to the Measuring Component Type and service point.
Answer: C
NEW QUESTION 52
Which three statements are true in relation to Financial Transaction creation algorithms? (Choose three.)
- A. They control when a Financial Transaction is to be swept onto a bill.
- B. They control how the payoff balance is affected.
- C. They control how the General Ledger details are created as these must always exist against a Financial Transaction.
- D. They control how the current balance is affected.
- E. They control if and how the General Ledger entries are created.
Answer: A,B,E
NEW QUESTION 53
How many bill segment-related financial transactions do Payment Arrangements have?
- A. unlimited
- B. none
- C. depends on the number of bills that will contain the customer's payment arrangement details
- D. depends on the number of payments that are part of the payment arrangement
- E. one
Answer: E
Explanation:
Reference:
20Bill%20Customers/4.2.2.12%20CCB.v2.4.Manage%20Payment%20Arrangement%20Charges.pdf (14)
NEW QUESTION 54
Which statement is true about specifications?
- A. Specifications can include peer specifications.
- B. Specifications include the inspection history of an asset.
- C. A single specification can only be used on one asset.
- D. Specifications apply only to assets and not to components.
Answer: C
NEW QUESTION 55
What determines an Account's Balance?
- A. the logic defined in a plug-in spot on the Installations Option
- B. the amount recorded in the "Balance Due" field on an account
- C. the sum of all the Financial Transactions linked directly to the service agreements related to the account
- D. the sum of all the Financial Transactions linked directly to the account
- E. the sum of all the balances recorded in the "Balance Due" field on each service agreement related to the account
Answer: D
NEW QUESTION 56
New: An electric utility is starting an Advanced Meter Infrastructure (AMI) roll-out for their residential customers. The initial plan is to roll out devices from their manufacturer with potentially three different device models. The customer has not decided what head-end systems they will use to communicate with these devices. Based on the customer's initial roll-out strategy, the devices will have to be configured consistently to support existing tariffs for billing.
Which is a valid consideration to determine the setup of device type administrative data for this implementation?
- A. valid head-end systems, valid device configuration types, and the electricity service type
- B. the model number
- C. billing usage rules
- D. the device's date of manufacturer
Answer: D
NEW QUESTION 57
......
What is the duration, language, and format of Oracle 1Z0-996-20: Oracle Utilities Customer Cloud Service 2020 Implementation Essentials Exam
Following are the quick details related to the Oracle 1z0-996 Certification Exam
- Exam Name: Oracle Utilities Customer Cloud Service 2019 Implementation Essentials
- Period of examination For attempting 70 questions, the candidates would have 120 minutes. For candidates to schedule the exam and restrict too much time to one question or subject, therefore, it becomes necessary.
- Exam type: Multiple Choice Questions
- Exam Code: 1z0-996
- Exam Price: $245 (USD) The price for a country may vary depending on the localized currency rates.
- Registration: The exam certificate needs to be purchased for all candidates who are eligible to take the exam. The candidate can register on Oracle Education Portal after purchasing the voucher.
- Test voucher: The exam vouchers may be obtained from candidates. The voucher is available for six months after the problem date, which is like a gift voucher that is forfeited, if not used within six months.
- Duration: 120 minutes
- Pass Score: 68%
- Mode of exam: Proctored examination online. Candidates may take the exam at any time according to their preference from wherever. There is also an opportunity for candidates to take exams in one of the permitted training center’s. At the time of enrollment, applicants may choose the examination mode according to their convenience.
- Results of examination The credential Oracle 1z0-996 is a pass or fail test and the applicant must score a minimum of 68% for a certification review. Within 30 minutes of completing the certification examination, the candidates shall obtain an email with the results from Oracle. Exam reports can also be seen on the Online site CertView, and candidates can visit the portal to access the exam results and connect to the CertView account.
- Number of Questions: 70 Questions
Authentic Best resources for 1Z0-996-20 Online Practice Exam: https://www.lead2passexam.com/Oracle/valid-1Z0-996-20-exam-dumps.html