NCA-5.15 Training & Certification Get Latest Nutanix Certified Associate Updated on Oct 10, 2021
Certification Training for NCA-5.15 Exam Dumps Test Engine
NEW QUESTION 37
An administrator has recently added two nodes to an existing three-node vSphere-based Nutanix cluster.
After adding the nodes to the cluster, the administrator tries to migrate a few VMs to the new nodes, but found that no datastore exist on these new nodes yet What action should the administrator take to resolve this issue?
- A. Click Mount on all ESXi hosts on containers
- B. Configure iSCSl Software Adapter on hosts
- C. Add the host IP addresses to cluster whitelists
- D. Configure the firewall to allow NFS datastore access
Answer: A
NEW QUESTION 38
Refer to the exhibit.
An administrator wants to make sure there are enough compute resources within the AHV-based Nutanix cluster during any maintenance operations or a node failure.
What configuration should the administrator change to achieve this task?
- A. Reserve 33% CPU and 33% memory
- B. Enable Degraded Node Detection
- C. Enable MA Reservation
- D. Set virtual machine affinity rules
Answer: C
NEW QUESTION 39
Refer to the exhibit.
What is indicated by the yellow area of the chart?
- A. Normal utilization
- B. Abnormal utilization
- C. Critical alerts
- D. Warning alerts
Answer: D
NEW QUESTION 40
An administrator needs to upgrade AOS for a dark site cluster by using Prism. What step needs to be completed prior to performing the upgrade?
- A. Manually upload binaries 10 a local http server.
- B. Use The LCM dark site option providing AOS binaries
- C. Extract the AOS binaries to the CVM
- D. Manually upload AOS binaries and metadata
Answer: D
NEW QUESTION 41
Which two Protection Domain features require a configured schedule of less than 15 minutes? (Choose two.)
- A. Synchronous DR
- B. Asynchronous DR
- C. NearSyncRD
- D. Metro Availability DR
Answer: C,D
NEW QUESTION 42
What is the minimum RPO supported for a single-node or two-node cluster?
- A. 5 hours
- B. 15 minutes
- C. 1 hour
- D. 6 hours
Answer: D
NEW QUESTION 43
A mission critical application with four VMs have been deployed inside of a six-node Nutanix cluster. An alert is generated that a node in the cluster has failed and is no longer online. After the alert, two of the VMs reboot and come back online on another node.
Which feature, when configured, would have prevented the two VMs from rebooting?
- A. Protection Domain
- B. VM High Availability
- C. Host Affinity
- D. Host Anti-Affinity
Answer: C
NEW QUESTION 44
Which Deduplication technique could be used to increase the effective storage capacity of a cluster?
- A. inline deduplication
- B. Thin deduplication
- C. Near-line deduplication
- D. Post-process deduplication
Answer: D
NEW QUESTION 45
An administrator with an AHV cluster notices that time/date stamps in logs for some VMs are not correct.
After investigating, the administrator finds that many of their user VMs are set to UTC What two methods can be used to resolve the issue? (Choose two.)
- A. Configure the time zone for each VM using Prism.
- B. Configure NTP within Prism.
- C. Configure NTP inside each guest VM.
- D. Configure the VMs time zone inside each guest VM.
Answer: A,B
NEW QUESTION 46
An application owner had reported that an AHV-based critical application VM is performing very slowly.
After initial diagnostics, it has been observed that the CPU utilization is significantly higher than normal.
What two actions should the administrator take on this VM without shutting it down? (Choose two.)
- A. Ensure CPU hot-add is supported by the Guest O
- B. Use PrismElement to increase the number of cores
- C. Configure additional cores in acli
- D. Increase number of vCPU in Prism Element
Answer: A,D
NEW QUESTION 47
An administrator has a SQL VM running, which is experiencing high disk latency.
What could the administrator do to alleviate this?
- A. Attach additional Volume Groups to the VM
- B. Create another Storage Container
- C. Add more CPU and Memory to the VM
- D. Increase CPU and Memory on the CVM
Answer: B
NEW QUESTION 48
An administrator needs to expand a Nutanix cluster that is tagging the network traffic at the CVM and AHV level. However, the administrator doesn't remember the configured VLAN ID.
Which command can the administrator run to find the correct VLAN ID from the CVM?
- A. manage-ovs
- B. ovs-vscl
- C. acli
- D. ifconfig
Answer: B
NEW QUESTION 49
Which policy specifies that a selected VM will only run on a specific group of nodes?
- A. Anti-affinity
- B. Fixed
- C. Isolation
- D. Affinity
Answer: D
NEW QUESTION 50
An administrator needs to provide users access to Prism Central Projects Which source of user accounts must the administrator use?
- A. Open LDAP
- B. SAML2 Provider
- C. Active Directory
- D. Local users
Answer: C
NEW QUESTION 51
Refer to the exhibit.
An administrator has created a new Windows VM and given it to the user. The user states that only the C drive mapping is visible within the Windows OS.
What is causing this issue?
- A. The user has not formatted and assigned drive letters to the additional disks.
- B. The additional disks were formatted as NTFS in Prism Central.
- C. The administrator has not run the dd command line community utility.
- D. The additional disks have not been formatted as ExFAT in Prism Central.
Answer: A
NEW QUESTION 52
A developer requests that a VM connects to a block device from an older ISCSI disk array, in order to support an application being transitioned to Nutanix.
What should the Nutanix administrator do to complete this task?
- A. Add the array to the whitelist to access the storage container directly.
- B. Use Volumes to add the device as a drive letter.
- C. Use Flits to map a network drive letter.
- D. Add the VM to the whitelist to allow it to access the block device.
Answer: B
NEW QUESTION 53
What is required to schedule VM snapshots?
- A. Consistency Group
- B. Protection Domain
- C. Volume Group
- D. Categories
Answer: B
NEW QUESTION 54
An administrator wants to deploy a virtual desktop solution on a Nutanix cluster and wants to use the existing production network segment. Due to security concerns, DHCP traffic is blocked on the upstream network switch.
How should the administrator proceed?
- A. Enable DHCP on the TOR Switches
- B. Enable Nutanix Flow
- C. Install and configure third-party DHCP Software
- D. Enable IPAM and configure an IP Address Pool
Answer: D
NEW QUESTION 55
Which option allows administrators to specify groups of VMs and assign them to a destination for Disaster Recovery using Leap?
- A. Availability Zones
- B. Protection Policies
- C. Security Policies
- D. Recovery Plans
Answer: A
NEW QUESTION 56
Refer to the exhibit.
An administrator has created a new VM, but when accessing the console to monitor the guest install, the administrator sees the error shown in the exhibit What is the likely cause of this issue?
- A. The Nuianix VirtlO driver (SO was not mounted.
- B. The wrong type of disk was specified.
- C. The boot order is incorrectly configured.
- D. The installation media was not mounted.
Answer: D
NEW QUESTION 57
An administrator wants to copy some virtual machine disk files to ADSF from an external VMware ESXi host.
Which two actions should the administrator take to complete this task? (Choose two.)
- A. Configure Volume Group
- B. Configure whitelist on container
- C. Enable CHAP on Volume Group
- D. Mount container as NFS on external host
Answer: B,D
NEW QUESTION 58
Refer to the exhibit.
An administrator has received the error shown in the exhibit.
Which two steps should the administrator take, in preparation for opening a Nutanix support ticket? (Choose two.)
- A. Get the AOS version from the Settings Page
- B. Get the DIMM Slot Number from the node BIOS
- C. Get the Block Serial Number from the Hardware Page
- D. Get the Node Serial Number from IPMI
Answer: B,D
NEW QUESTION 59
......
Step by Step Guide to Prepare for NCA-5.15 Exam: https://www.lead2passexam.com/Nutanix/valid-NCA-5.15-exam-dumps.html