Network Appliance NS0-183 Real Exam Questions and Answers FREE
Exam Dumps NS0-183 Practice Free Latest Network Appliance Practice Tests
Network Appliance NS0-183 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 50
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A subscription license is required.
- B. A site license is required.
- C. No license is required.
- D. A capacity license is required.
Answer: D
NEW QUESTION 51
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. node CPU utilization
- B. data switch cabling
- C. cluster switch cabling
- D. shelf connectivity
Answer: A,D
Explanation:
Explanation/Reference: https://www.doc-developpement-durable.org/file/Projets-informatiques/cours-&-manuels- informatiques/Netapp/Data%20ONTAP%208.0%207-Mode%20System%20Administration%20Guide.pdf
NEW QUESTION 52
You have a 6-node ONTAP 9.1 cluster with two FAS6290 nodes and four FAS8080 EX nodes using a SAN protocol.
In this scenario, how many FAS9000 HA pairs would be joined to this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 53
You just installed a new AFF A220 2-node cluster without additional disk shelves. When you review the Config Advisor output, you notice that your SAS cabling appears to be single-path HA.
In this scenario, which statement is true?
- A. The Config Advisor version you are using requires a plugin for AFF controllers.
- B. Cable controller 1 0a to controller 2 0a, and cable controller 1 0b to controller 2 0b.
- C. AFF A220 controllers with internal disks support only single-path HA.
- D. Cable controller 1 0a to controller 2 0b, and cable controller 1 0b to controller 2 0a.
Answer: D
NEW QUESTION 54
Which statement regarding Epsilon is true?
- A. The epsilon acts as a tiebreaker in a 2-node cluster.
- B. Epsilon is reassigned automatically to the HA partner in case the current owner of the epsilon suddenly reboots.
- C. The node holding the epsilon has extra fractional vote weight.
- D. Whenever a new node is added, the epsilon is automatically reassigned to this node.
Answer: C
NEW QUESTION 55
Which two commands verify that AutoSupport is working as expected?
- A. autosupport history show
- B. autosupport check show
- C. autosupport test show
- D. autosupport show
Answer: A,B
NEW QUESTION 56
After completing the installation of an AFF A800 ONTAP AI cluster, you are asked which contacts are available for additional help in obtaining immediate assistance in solving P1 issues.
In this scenario, what do you tell the customer?
- A. Contact NetApp Support by telephone.
- B. Use the NetApp KB TV channel.
- C. Use Guided Problem Solving.
- D. Contact NetApp Support using chat.
Answer: A
NEW QUESTION 57
You have set up a new 2-node switchless cluster and want to verify that the failover is configured correctly.
In this scenario, which two commands accomplish this task? (Choose two.)
- A. storage failover show-takeover
- B. cluster ha show
- C. storage failover show
- D. cluster ring show
Answer: B,C
NEW QUESTION 58
You want to ensure the highest path resilience and performance increase to the storage stack on your FAS8700 cluster.
In this scenario, which two types of stack cabling are available to use? (Choose two.)
- A. multipath HA
- B. single path
- C. mixed-mode
- D. quadpath HA
Answer: A,C
NEW QUESTION 59
You create a new CIFS data LIF with the default failover group.
In this scenario, where will the new LIF failover if the node that owns the new LIF panics?
- A. to any available port in the same subnet
- B. to any port in the cluster that is administratively up
- C. to any available port listed in the broadcast domain
- D. to any port in the cluster that is operationally up
Answer: C
NEW QUESTION 60
You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.
Which two conditions must be fulfilled before you start the migration? (Choose two.)
- A. The 2-node switchless configuration must be properly set up and functioning.
- B. All cluster LIFs must have an MTU size of 1500.
- C. All cluster LIFs must be in the up state and on their home ports.
- D. The "Enabled Switchless Cluster" option must be manually set to "false".
Answer: A,C
NEW QUESTION 61
You must replace a FAS2750 switchless cluster with an AFF A220 switchless cluster for a customer. The customer requires that you transfer the data from the FAS2750 cluster to the AFF A220.
In this scenario, which two methods would you use to migrate the customer's data? (Choose two.)
- A. Establish an SVM-DR relationship between the two clusters and activate the destination SVM.
- B. Install SAS cables between the two clusters and use the vol move command.
- C. Provide cluster switches and build a 4-node cluster, then use the vol move command.
- D. Remove all of the HDD drives from the FAS cluster and install them into the AFF cluster.
Answer: B,C
NEW QUESTION 62
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. serial port
- B. rlogin
- C. SSH
- D. SFP+ port
Answer: A,C
NEW QUESTION 63
While preparing for a new ONTAP installation, you discover an issue with the controllers that are running ONTAP 9.5. The issue is not affecting controllers that are running ONTAP 9.4 with the latest patch version. In this scenario, which two steps should you perform to solve the problem? (Choose two.)
- A. Inform your customer that they must always install the latest supported ONTAP release.
- B. Review the issue with the customer's deployment to see if it would be affected.
- C. If the controllers are in a Product Support Bulletin with ONTAP 9.5, open a case and wait for support to provide a patch release.
- D. Download ONTAP 9.4 with the latest patch version and ONTAP 9.5 for an eventual rollback on the day of the installation.
Answer: B,C,D
NEW QUESTION 64
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. node CPU utilization
- B. data switch cabling
- C. cluster switch cabling
- D. shelf connectivity
Answer: A,D
NEW QUESTION 65
You have just installed a new AFF A220 4-node cluster with ONTAP 9.5 for a customer.
Which two cluster switches are supported in this scenario? (Choose two.)
- A. Cisco MDS 9148S
- B. Cisco Nexus 5596UP
- C. Brocade 6510
- D. NetApp CN1610
Answer: B,D
NEW QUESTION 66
You finished a new installation and executed Config Advisor successfully. You review the physical racking and cabling on one of the controllers, and notice an amber light that was not previously on.
Which two actions should you perform before you turn over the cluster for production? (Choose two.)
- A. Execute Config Advisor again to check for new errors.
- B. Let the customer know the cluster is operating normally while the amber LED is on.
- C. Remove cables connected to the controller until you find the one responsible for the controller issue.
- D. Review AutoSupport messages which could explain the controller state.
Answer: A,D
NEW QUESTION 67
You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.
In this scenario, which command would you use to accomplish this task?
- A. show running-config
- B. switchcfgshow
- C. fabricshow
- D. config show
Answer: B
NEW QUESTION 68
You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.
Which type of SVM needs to be created to complete the installation?
- A. data SVM
- B. system SVM
- C. multitenancy node SVM
- D. admin SVM
Answer: A
NEW QUESTION 69
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
- A. private network
- B. cluster LIFs
- C. client network
- D. management LIFs
Answer: A,B
NEW QUESTION 70
An administrator is installing a new AFF A220 HA pair and needs to convert two unified target adapter (UTA) ports from converged network adapter (CNA) to FC.
In this scenario, which action sequence will accomplish this task?
- A. 1. Set the adapter to status-admin down. 2. Reboot the node. 3. Set the port mode to fc. 4. Set the adapter to status-admin up.
- B. 1. Set the adapter to status-admin down. 2. Set the port mode to fc. 3. Set the adapter to status-admin up. 4. Reboot the node.
- C. 1. Set the adapter to status-admin down. 2. Set the port mode to fc. 3. Reboot the node. 4. Set the adapter to status-admin up.
- D. 1. Set the port mode to fc. 2. Set the adapter to status-admin down. 3. Reboot the node. 4. Set the adapter to status-admin up.
Answer: C
NEW QUESTION 71
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Move the SAS cables to a new stack.
- B. Remove the Ethernet cables.
- C. Disable out-of-band ACP.
- D. Enable in-band ACP.
Answer: A,C
Explanation:
Explanation/Reference:
NEW QUESTION 72
When completing a new ONTAP 9.5 cluster base installation, which three SVM types will be present on the system by default? (Choose three.)
- A. admin SVM
- B. system SVM
- C. data SVM
- D. node SVM
- E. cluster SVM
Answer: A,B,D
NEW QUESTION 73
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?
- A. ASA controllers can only be added to clusters that have existing SAN licenses.
- B. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
- C. ASA controllers can only be installed as a standalone HA pair.
- D. Add the ASA controllers to an existing 10-node cluster.
Answer: A
NEW QUESTION 74
......
NetApp NS0-183 Exam Certification Details:
| Exam Name | Storage Installation Engineer ONTAP |
| Number of Questions | 60 |
| Duration | 90 minutes |
| Exam Code | NS0-183 NCSIE |
| Sample Questions | NetApp NS0-183 Sample Questions |
| Passing Score | 67% |
| Recommended Training | ONTAP Clustered Installation Workshop (ILT) ONTAP Cluster Administration (vILT/ILT) Universal FAS Installation (WBT) Introduction to NetApp Installation Standard (WBT) |
| Exam Price | $150 USD |
| Exam Registration | PEARSON VUE |
Verified NS0-183 Exam Dumps Q&As - Provide NS0-183 with Correct Answers: https://www.lead2passexam.com/NetworkAppliance/valid-NS0-183-exam-dumps.html