Pass Huawei HCIP-Transmission V2.0 Exam in First Attempt Guaranteed Updated Dump from Lead2PassExam!
Pass H31-341 Exam with 202 Questions - Verified By Lead2PassExam
NEW QUESTION 46
Before querying the error and optical power on the network management, you need to perform the () operation. Otherwise, you cannot query the corresponding teaching data.
- A. Configuration data
- B. Synchronizing network metadata
- C. Create a logical fiber
- D. Turn on NE performance monitoring time.
Answer: D
NEW QUESTION 47
During the configuration of the E-LAN, the "MAC Address Learning Mode" can be set to SVL and IVL. SVL is a stand-alone VLAN learning, and IVL is a shared VLAN learning.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION 48
What are the classification of Ethernet performance tests? (Multiple choice)
- A. Network equipment performance verification test
- B. Network performance test
- C. Custom test
Answer: A,B,C
NEW QUESTION 49
Which of the following features does the EX40 add than X40?
- A. The number of combined waves is more
- B. Support single channel optical power monitoring
- C. Support light layer crossing
- D. Less occupied slots
Answer: B
NEW QUESTION 50
The following description of the Directioned scenario, which is correct? (Multiple choice)
- A. The wavelength carrying the local service can be transmitted to fixed direction.
- B. If the current path needs to be adjusted, you must inbound to adjust the fiber connection of the network.
- C. When the service needs to be adjusted, or the working path is faulty, the optical crossover can be manually configured to implement flexible scheduling of services.
- D. Directioned scenes are applied to networks that are not ASON.
Answer: A,B,D
NEW QUESTION 51
The E&M signal defines the type of connection between a relay device and a signaling unit. Which of the following belongs to the relay device?
- A. Softswitch platform
- B. PBX
- C. Telecommunications Exchange
- D. E&M voice exchange
Answer: B
NEW QUESTION 52
When the board detects that the error rate of the regenerator section signal exceeds 10 by detecting the B1 byte, the B1_SD alarm is reported.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION 53
The OTS path refers to the physical fiber connection between two adjacent OM/OD/OA on the main optical path.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION 54
When configuring the Ethernet Layer 2 attribute, set the Default VLAN ID and VLAN Priority of the untagged frame when the TAG ID is set to Accese or Hybrid. The "VLAN priority" is set according to the QoS of the unified plan.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION 55
The length range of the DATA field in the Ethernet frame structure is ().
- A. 46-1500 bytes
- B. 46-1518 bytes
- C. 64-1500 bytes
- D. 64-1518 bytes
Answer: A
NEW QUESTION 56
Which of the following statements about the latency of a storage and forwarding device is false?
- A. The last bit of the data frame enters the device and starts timing.
- B. The first bit of the data frame appears at the output port of the device and stops timing.
- C. The first bit of the data frame enters the device and starts timing.
- D. Reflects the performance of network devices. Generally, it is not compared with the bit forwarding device.
Answer: C
NEW QUESTION 57
Which of the following description of the principle of automatic protection switching of the standard SSM protocol is correct? (Multiple Choice)
- A. According to the clock source priority table, the network element first selects the clock with the highest quality level from the available clock sources as the synchronization source.
- B. If there are multiple clock sources with the highest quality level, the network element selects the clock with the highest clock priority as the synchronization source.
- C. The network element broadcasts the clock quality information and the clock source ID of the synchronization source to the downlink site through the S1 byte, and reverse notices the uplink site that the clock quality from the local network element is "not available for synchronization" by the S1 byte in the direction of the synchronization source.
- D. The network element broadcasts the clock quality information of the synchronization source to the downlink site through the s1 byte. And reverse notice the uplink site by the S1 byte in the direction of the synchronization source that the clock quality from the local network element is "not available for synchronization".
Answer: A,B,C,D
NEW QUESTION 58
Which of the following description of the single station commissioning is wrong?
- A. It is strictly forbidden to plug and unplug the power plug and PIU board.
- B. In case of power failure, the contact board can be used without anti-static wrist or anti-static gloves.
- C. If the input voltage of the equipment is not within the required range, suggestions for rectification should be proposed.
- D. Single station hardware check is complete, make sure all power switches are in the off position
Answer: B
NEW QUESTION 59
The setting of alarm reversal is based on:
- A. Port
- B. Alarm
- C. Veneer
- D. Network element
Answer: A
NEW QUESTION 60
Which of the following functions is added to EX40 compared with X40?
- A. More multiplexed and demultiplexed wavelengths
- B. Monitors the optical power of a single channel.
- C. Supports optical-layer cross-connections.
- D. Fewer slots are occupied.
Answer: A
NEW QUESTION 61
The causes of discrete services are as follows:
- A. A subnet service whose source or sink port is not in the management scope of the U2000 is available.
- B. The logical fiber connection of the NE is inconsistent with the physical fiber connection.
- C. The configuration data on the NE side is not uploaded to the U2000.
- D. The cross-connection configuration on the NE is incorrect.
Answer: C
NEW QUESTION 62
The ways of synchronize alarms are (). (Multiple Choice)
- A. Manual synchronization
- B. Automatic synchronization
- C. Timing synchronization
Answer: A,B
NEW QUESTION 63
Which of the following description of the evolutionist in the mainstream SDN model in the industry is correct? (Multiple Choice)
- A. Control flexibility is moderate and open is not complete
- B. Try to preserve and reuse existing routing protocols and IP network technologies
- C. Make full use of existing equipment and achieve fast
- D. Device programmable, open northbound API interface
Answer: A,B,C,D
NEW QUESTION 64
......
Penetration testers simulate H31-341 exam: https://www.lead2passexam.com/Huawei/valid-H31-341-exam-dumps.html
Free Test Engine For HCIP-Transmission V2.0 Certification Exams: https://drive.google.com/open?id=1epUVEOv3n5_nDZYcXx9rv-EJ2yc8PPB5