Verified AZ-220 dumps Q&As - Pass Guarantee Exam Dumps Test Engine [2021]
AZ-220 dumps and 128 unique questions
NEW QUESTION 50
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
- B. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
- C. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
- D. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
Answer: B,D
Explanation:
Explanation/Reference:
Process and manage data
Question Set 3
NEW QUESTION 51
You create a new IoT device named device1 on iothub1. Device1 has a primary key of Uihuih76hbHb.
How should you complete the device connection string? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/quickstart-control-device-dotnet
NEW QUESTION 52
You have an Azure IoT hub named Hub1 and a root certification authority (CA) named CA1. Hub1 is configured to use X.509 certificate device authentication.
You and a custom manufacturing partner complete a proof of possession flow.
You plan to deploy IoT devices manufactured by the custom manufacturing partner. Each device will have a certificate generated by an intermediate C You need to ensure that the custom devices can connect successfully to Hub1.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Sign the intermediate CA certificate by using the CA1 certificate.
2 - Sign the device certificate by using the intermediate CA
3 - Deploy the certificate chain to the device.
Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-x509-attestation
NEW QUESTION 53
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Stream Analytics job that receives input from an Azure IoT hub and sends the outputs to Azure Blob storage. The job has compatibility level 1.1 and six streaming units.
You have the following query for the job.
You plan to increase the streaming unit count to 12.
You need to optimize the job to take advantage of the additional streaming units and increase the throughput.
Solution: You change the query to the following.
Does this meet the goal?
- A. Yes
- B. No
Answer: A
Explanation:
Max number of Streaming Units with one step and with no partitions is 6.
Reference:
https://docs.microsoft.com/en-us/azure/stream-analytics/stream-analytics-parallelization
NEW QUESTION 54
You have an Azure IoT solution that includes an Azure IoT hub, 100 Azure IoT Edge devices, and 500 leaf devices.
You need to perform a key rotation across the devices.
Which three types of entities should you update? Each Answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. the iothubowner policy credentials
- B. the $edgeHub module identity
- C. the $edgeAgent module identity
- D. the leaf module identities
- E. the leaf device identities
- F. the IoT Edge device identities
Answer: B,E,F
Explanation:
To get authorization to connect to IoT Hub, devices and services must send security tokens signed with either a shared access or symmetric key. These keys are stored with a device identity in the identity registry.
An IoT Hub identity registry can be accessed like a dictionary, by using the deviceId or moduleId as the key. Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-dps/how-to-control-access
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-devguide-identity-registry
NEW QUESTION 55
You need to add Time Series Insights to the solution to meet the pilot requirements.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Provision Time Series Insights
2 - Route telemetry from IoT Hub to a custom event.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-update-create-environment
NEW QUESTION 56
You have an Azure IoT hub that uses a Device Provisioning Service instance to automate the deployment of Azure IoT Edge devices.
The IoT Edge devices have a Trusted Platform Module (TPM) 2.0 chip.
From the Azure portal, you plan to add an individual enrollment to the Device Provisioning Service that will use the TPM of the IoT Edge devices as the attestation mechanism.
Which detail should you obtain before you can create the enrollment.
- A. the X.509 device certificate and the certificate chain
- B. the primary key of the Device Provisioning Service shared access policy and the global device endpoint
- C. the scope ID and the Device Provisioning Service endpoint
- D. the endorsement key and the registration ID
Answer: D
Explanation:
The TPM simulator's Registration ID and the Endorsement key, are used when you create an individual enrollment for your device.
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-auto-provision-simulated-device-linux Implement Edge Question Set 1
NEW QUESTION 57
You have an Azure IoT solution that contains an Azure IoT hub.
You need to ensure that the IoT hub configuration is compliant with the Health Insurance Portability and Accountability Act (HIPAA) audit logging requirements.
What should you use?
- A. Azure Monitor alerts
- B. an Azure Policy definition
- C. Azure Advisor recommendations
- D. an Azure Sentinel workspace
Answer: B
Explanation:
Regulatory Compliance in Azure Policy provides Microsoft created and managed initiative definitions, known as built-ins, for the compliance domains and security controls related to different compliance standards, including HIPAA auditing logging.
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/security-controls-policy
NEW QUESTION 58
You are troubleshooting device connections to and disconnections from an Azure IoT hub.
You configure diagnostic logging for the IoT hub to send to Log Analytics.
You need to generate a report that displays the device connection and disconnection events.
How should you complete the query? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/monitor-iot-hub
NEW QUESTION 59
You are planning a proof of concept (POC) that will use an Azure IoT hub.
You have two self-signed client authentication certificates named Cert1 and Cert2. Cert1 has a basic constraint that contains Subject Type=C You need to identify which certificates to use.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: Cert2 only
Cert2: The leaf certificate, or end-entity certificate, identifies the certificate holder. It has the root certificate in its certificate chain as well as zero or more intermediate certificates. The leaf certificate is not used to sign any other certificates. It uniquely identifies the device to the provisioning service and is sometimes referred to as the device certificate.
Box 2: Cert1 only
Cert1: A root certificate is a self-signed X.509 certificate representing a certificate authority (CA). It is the terminus, or trust anchor, of the certificate chain. Root certificates can be self-issued by an organization or purchased from a root certificate authority.
Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-x509-attestation
NEW QUESTION 60
You have an Azure IoT solution that includes a standard tier Azure IoT hub and an IoT device.
The device sends one 100-KB device-to-cloud message every hour.
You need to calculate the total daily message consumption of the device. What is the total daily message consumption of the device?
- A. 0
- B. 4,800
- C. 1
- D. 2,400
Answer: A
Explanation:
100 KB * 24 is around 2,400 bytes.
The 100 KB message is divided into 4 KB blocks, and it is billed for 25 messages. 25 times 24 is 600 Note: The maximum message size for messages sent from a device to the cloud is 256 KB. These messages are metered in 4 KB blocks for the paid tiers so for instance if the device sends a 16 KB message via the paid tiers it will be billed as 4 messages.
Reference:
https://azure.microsoft.com/en-us/pricing/details/iot-hub/
NEW QUESTION 61
You have an Azure IoT hub that uses a Device Provisioning Service instance.
You create a new individual device enrollment that uses symmetric key attestation.
Which detail from the enrollment is required to auto provision the device by using the Device Provisioning Service?
- A. the device identity of the IoT hub
- B. the registration ID of the enrollment
- C. the primary key of the enrollment
- D. the hostname of the IoT hub
Answer: B
Explanation:
The registration ID is used to uniquely identify a device registration with the Device Provisioning Service. The device ID must be unique in the provisioning service ID scope. Each device must have a registration ID.
Note: An individual enrollment is an entry for a single device that may register. Individual enrollments may use either X.509 leaf certificates or SAS tokens (from a physical or virtual TPM) as attestation mechanisms. The registration ID in an individual enrollment is alphanumeric, lowercase, and may contain hyphens.
Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-service#enrollment
NEW QUESTION 62
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this question, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure IoT solution that includes an Azure IoT hub, a Device Provisioning Service instance, and 1,000 connected IoT devices.
All the IoT devices are provisioned automatically by using one enrollment group. You need to temporarily disable the IoT devices from the connecting to the IoT hub.
Solution: From the IoT hub, you change the credentials for the shared access policy of the IoT devices. Does the solution meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-dps/how-to-unprovision-devices
NEW QUESTION 63
You create a new IoT device named device1 on iothub1. Device1 has a primary key of Uihuih76hbHb.
How should you complete the device connection string? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: iothub1
The Azure IoT hub is named iothub1.
Box 2: azure-devices.net
The format of the device connection string looks like:
HostName={YourIoTHubName}.azure-devices.net;DeviceId=MyNodeDevice;SharedAccessKey={YourSharedAccessKey} Box 1: device1 Device1 has a primary key of Uihuih76hbHb.
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/quickstart-control-device-dotnet
NEW QUESTION 64
You have 1,000 devices that connect to an Azure IoT hub.
You are performing a scheduled check of deployed IoT devices.
You plan to run the following command from the Azure CLI prompt.
az iot hub query --hub-name hub1 --query-command "SELECT * FROM devices WHERE connectionState = 'Disconnected'" What does the command return?
- A. the Device Disconnected events
- B. the device credentials
- C. the device twins
- D. the Connections logs
Answer: C
Explanation:
Device twin queries: IoT Hub exposes the device twins as a document collection called devices. For example, the following query retrieves the whole set of device twins:
SELECT * FROM devices
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-devguide-query-language#device-and-module-twin- queries
NEW QUESTION 65
You have an Azure IoT solution that includes a basic tier Azure IoT hub named Hub1 and a Raspberry Pi device named Device1. Device1 connects to Hub1.
You back up Device1 and restore the backup to a new Raspberry Pi device.
When you start the new Raspberry Pi device, you receive the following error message in the diagnostic logs of Hub1: "409002 LinkCreationConflict." You need to ensure that Device1 and the new Raspberry Pi device can run simultaneously without error.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. From Hub1, create a new consumer group.
- B. On the new Raspberry Pi device, modify the connection string.
- C. Upgrade Hub1 to the standard tier.
- D. From Hub1, modify the device shared access policy.
- E. From Hub1, create a new IoT device.
Answer: B,E
Explanation:
Explanation/Reference:
Explanation:
Note: Symptoms
You see the error 409002 LinkCreationConflict in logs along with device disconnection or cloud-to-device message failure.
Cause
Generally, this error happens when IoT Hub detects a client has more than one connection. In fact, when a new connection request arrives for a device with an existing connection, IoT Hub closes the existing connection with this error.
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-troubleshoot-error-409002- linkcreationconflict#symptoms
https://devblogs.microsoft.com/iotdev/understand-different-connection-strings-in-azure-iot-hub/
NEW QUESTION 66
You are writing code to provision IoT devices by using the Device Provisioning Service.
Which two details from the Overview blade of the Device Provisioning Service are required to provision a new IoT client device? To answer, select the appropriate detail in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/tutorial-set-up-device
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
NEW QUESTION 67
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have 20 IoT devices deployed across two floors of a building. The devices on the first floor must be set to 60 degrees. The devices on the second floor must be set to 80 degrees.
The device twins are configured to use a tag that identifies the floor on which the twins are located.
You create the following automatic configuration for the devices on the first floor.
You create the following automatic configuration for the devices on the second floor.
The IoT devices on the first floor report that the temperature is set to 80 degrees.
You need to ensure that the first-floor devices are set to the correct temperature.
Solution: In the automatic configuration for the second-floor devices, you set Version to 2.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/module-deployment-monitoring?view=iotedge-2020-11
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-automatic-device-management-cli
NEW QUESTION 68
You have an Azure IoT solution that includes several Azure IoT hubs.
A new alerting feature was recently added to the IoT devices. The feature uses a new device twin reported property named alertCondition.
You need to send alerts to an Azure Service Bus queue named MessageAlerts. The alerts must include alertCondition and the name of the IoT hub.
Which two actions should you perform? Each Answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Add the following message enrichments:
Name = iotHubName
Value = $twin.tag.location
Endpoint = MessageAlert - B. Configure File upload for each IoT hub. Configure the device to send a file to an Azure Storage container that contains the device name and status message.
- C. Add the following message enrichments:
Name = iotHubName Value = $iothubname
Endpoint = MessageAlert - D. Create an IoT Hub routing rule that has a data source of Device Telemetry Messages and select the endpoint for MessageAlerts.
- E. Create an IoT Hub routing rule that has a data source of Device Twin Change Events and select the endpoint for MessageAlerts.
Answer: A,C
Explanation:
B: Message enrichments is the ability of the IoT Hub to stamp messages with additional information before the messages are sent to the designated endpoint. One reason to use message enrichments is to include data that can be used to simplify downstream processing. For example, enriching device telemetry messages with a device twin tag can reduce load on customers to make device twin API calls for this information.
D: Applying enrichments
The messages can come from any data source supported by IoT Hub message routing, including the following examples:
-->device twin change notifications -- changes in the device twin device telemetry, such as temperature or pressure device life-cycle events, such as when the device is created or deleted Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-message-enrichments-overview
NEW QUESTION 69
......
AZ-220 Dumps for Pass Guaranteed - Pass AZ-220 Exam: https://www.lead2passexam.com/Microsoft/valid-AZ-220-exam-dumps.html
AZ-220 Exam Dumps - Try Best AZ-220 Exam Questions: https://drive.google.com/open?id=1OTHCvM8RTGmEOI3yLypwlnx5LD9gKfmI