Updated Oct-2022 1Z0-996-21 Exam Practice Test Questions
Verified 1Z0-996-21 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump
NEW QUESTION 16
The base package usage transaction business object is represented by D2-UsageTransaction. The usage calculation engine or process drives the specifics of the usage to be calculated on this business object.
Based on this, which three configuration areas will have an impact on the usage calculation process? (Choose three.)
- A. VEE rule
- B. Usage Rule
- C. TOU map
- D. Factor Override
Answer: B,C,D
NEW QUESTION 17
Which three statements are true in relation to a Payment Arrangement Request? (Choose three.)
- A. calculates delinquent amount for Service Agreements eligible for Payment Arrangement
- B. ensures creation of either Pay Plan or Payment Arrangement
- C. creates the Payment Arrangement Service Agreement
- D. examines the Account's eligibility for Payment Arrangement
- E. determines if the Payment Arrangement Request requires approval
Answer: C,D,E
NEW QUESTION 18
Within the application, operational devices can be assets or components.
Which two statements are true about components? (Choose two.)
- A. Components have a disposition that tracks their location and status.
- B. Components can be installed at locations.
- C. Components are not a class of assets.
- D. Components are attached to assets.
- E. Components can't have specifications.
Answer: B,D
NEW QUESTION 19
What can cause multiple bill lines for a rate component to be produced in a bill calculation header?
- A. change in Bill Factor
- B. change in Rate Version Calculation Group
- C. changes in Rate Schedule and Bill Factor
- D. change in Rate Schedule
- E. changes in Rate Version Calculation Group and Bill Factor
Answer: C
NEW QUESTION 20
When configuring the Get Scalar Details usage rule, which three attributes can be defined to retrieve scalar values? (Choose three.)
- A. Service Point ID
- B. Device ID
- C. Service Quantity Identifier
- D. Time of Use
- E. Unit of Measure
Answer: A,B,D
NEW QUESTION 21
What Service Order activity types does the application include?
- A. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
- B. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
- C. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
- D. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service
Answer: D
NEW QUESTION 22
When a customer has a specific price for a defined quantity which is different to other customers, where is this specific price for the related Bill Factor defined?
- A. Bill Factor Characteristic
- B. Account Characteristic
- C. Service Agreement - Contract Value
- D. Calculation Rule
- E. Bill Factor Value
Answer: C
NEW QUESTION 23
Your client has the following requirements:
Many customers are installing their own solar electrical generation equipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.
In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid. Both reads will be stored in kWh, but the import is subtractive and export is consumptive.
What solution should you choose to configure the measuring component types for these specific requirements?
- A. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).
- B. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.
- C. Create two service points: one for subtractive import and the other for consumptive export.
- D. Create two new measuring component types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.
Answer: D
NEW QUESTION 24
Which usage rule would be used to retrieve scalar measurements and convert the total from one unit of measure to another?
- A. Get Scalar Details and Math
- B. Get Scalar Details and Axis Conversion
- C. Get Scalar Details and Apply Formula
- D. A custom set of usage rules must be written.
Answer: B
NEW QUESTION 25
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. Two
- B. Four
- C. One
- D. Three
- E. None
Answer: C
NEW QUESTION 26
Which major entities hold the key geographic, demographic, and financial information related to a customer who is financially responsible for a property?
- A. Account, Person, Premise, Service Agreement, Service Port
- B. Account, Customer Class, Person, Premise, Service Agreement
- C. Account, Customer Class, Premise, Service Agreement, Service Port
- D. Account, Bill, Customer Class, Premise, Service Agreement
- E. Account, Bill, Premise, Service Agreement, Service Port
Answer: A
NEW QUESTION 27
Usage transactions can contain date breaks. Which is used to supply date breaks?
- A. the Usage Subscription BO
- B. the Usage Subscription Type
- C. the requesting system or user input
- D. the Deferred Monitor Calculation Algorithm
Answer: B
NEW QUESTION 28
Measuring components are either subtractive or consumptive.
Which statement correctly describes these two concepts?
- A. Subtractive measuring components are associated only with water service, whereas consumptive measuring components are for gas and electric services.
- B. A subtractive measuring component's consumption for a given period of time is the end measurement minus the start measurement. A consumptive measuring component's consumption is simply the measurement itself, and represents the consumption for the period of time since the previous measurement was taken.
- C. Subtractive measuring components are used to measure demand, whereas consumptive measuring components are used to measure how much was consumed since the previous reading.
- D. Subtractive measuring components are associated with deductive meters, whereas consumptive measuring components are not.
Answer: C
NEW QUESTION 29
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?
- A. Measuring Component Type
- B. Device Type
- C. Device Type and Measuring Component Type
- D. Device Configuration Type
- E. Usage Type
Answer: D
NEW QUESTION 30
On which three entities can proration be disabled? (Choose three.)
- A. Calculation Rule Business Object
- B. Rate Version Calculation Group
- C. Bill Factor
- D. Calculation Rule
- E. Rate Schedule
Answer: A,B,E
NEW QUESTION 31
New: An electric utility is starting an Advanced Meter Infrastructure (AMI) roll-out for their residential customers. The initial plan is to roll out devices from their manufacturer with potentially three different device models. The customer has not decided what head-end systems they will use to communicate with these devices. Based on the customer's initial roll-out strategy, the devices will have to be configured consistently to support existing tariffs for billing.
Which is a valid consideration to determine the setup of device type administrative data for this implementation?
- A. the device's date of manufacturer
- B. billing usage rules
- C. valid head-end systems, valid device configuration types, and the electricity service type
- D. the model number
Answer: A
NEW QUESTION 32
What correctly describes the order in which algorithms, if plugged in, are executed when a bill changes from the "Pending" state to the "Complete" state?
- A. Customer Class - Pre-Bill Completion; Service Agreement Type - Pre-Bill Completion; Customer Class - Bill Completion; Service Agreement Type - Bill Completion; Customer Class - Post-Bill Completion
- B. Service Agreement Type - Pre-Bill Completion; Service Agreement Type - Bill Completion; Customer Class - Pre-Bill Completion; Customer Class - Bill Completion; Customer Class - Post-Bill Completion
- C. Service Agreement Type - Pre-Bill Completion; Customer Class - Pre-Bill Completion; Service Agreement Type - Bill Completion; Customer Class - Bill Completion; Customer Class - Post-Bill Completion
- D. Service Agreement Type - Pre-Bill Completion; Customer Class - Pre-Bill Completion; Service Agreement Type - Bill Completion; Customer Class - Bill Completion; Service Agreement Type - Post-Bill Completion; Customer Class - Post-Bill Completion
- E. Customer Class - Pre-Bill Completion; Customer Class - Bill Completion; Service Agreement Type - Pre- Bill Completion; Service Agreement Type - Post-Bill Completion
Answer: C
NEW QUESTION 33
How many bill segment-related financial transactions do Payment Arrangements have?
- A. none
- B. depends on the number of bills that will contain the customer's payment arrangement details
- C. depends on the number of payments that are part of the payment arrangement
- D. unlimited
- E. one
Answer: E
Explanation:
Reference:
20Bill%20Customers/4.2.2.12%20CCB.v2.4.Manage%20Payment%20Arrangement%20Charges.pdf (14)
NEW QUESTION 34
A usage subscription must exist before usage transactions can be calculated for a specific service point.
Where do you configure the usage recipient?
- A. in the Usage Subscription Type
- B. in the Usage Rule Type
- C. in the Measuring Component Type
- D. in the Service Point Type
- E. in the Device Type
Answer: A
NEW QUESTION 35
Your client has three requirements:
1. Apply validations on meter reads coming from the Data Collectors.
2. If a meter read does not pass the validation, an error will be generated and assigned to a user.
3. Retry the validation every 30 minutes for the errors in case the issue is related to configuration.
Which statement describes the base functions you should use?
- A. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)
- B. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.
- C. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)
- D. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).
- E. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.
Answer: C
NEW QUESTION 36
Which entity defines the type of collection process to start based on age of debt, amount of debt, and type of customer?
- A. Debt Class
- B. Collection Class
- C. Collection Process Template
- D. Customer Class
- E. Collection Class Control
Answer: A
NEW QUESTION 37
A device has one or more measuring components that measure consumption, demand, or other values.
Which lists two attributes of a measuring component?
- A. Serial Number and Badge Number
- B. Manufacturer and Model
- C. Channel Multiplier and Channel ID
- D. Channel ID and Badge Number
- E. Model and Serial Number
Answer: A
NEW QUESTION 38
......
Pass Oracle Utilities Customer Cloud 1Z0-996-21 Exam With 72 Questions: https://www.lead2passexam.com/Oracle/valid-1Z0-996-21-exam-dumps.html