Get 100% Success with Latest CCNP Service Provider 350-501 Exam Dumps Dec 24, 2023
The Best 350-501 Exam Study Material and Preparation Test Question Dumps
NEW QUESTION # 145
A network engineer is configuring Flexible NetFlow and enters these commands
What are two results of implementing this feature instead of traditional NetFlow? (Choose two.)
- A. CPU and memory utilization are reduced.
- B. The accuracy of the data to be analyzed is improved.
- C. The data export flow is more secure
- D. Only the flows of top 100 talkers are exported.
- E. The number of packets to be analyzed are reduced.
Answer: A,E
NEW QUESTION # 146
Refer to the exhibit:
You are configuring an administrative domain implement so that devices can dynamically learn the RP?
- A. BSR
- B. Auto-RP
- C. SSM
- D. BID1R-PIM
Answer: A
NEW QUESTION # 147
Refer to the exhibit:
After implementing a new design for the network, a technician reviews the pictured CLI output as part of the MOP.
Which two statements describe what the technician can ascertain from the ImpNull output? (Choose two.)
- A. Penultimate Hop Popping is in use for the prefix displayed
- B. Label 0 is used for the prefix displayed but will not be part of the MPLS label stack for packets destined for 192 168.10.10.
- C. Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for
192.168.10.10 - D. Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10
- E. Ultimate Hop Popping is in use for the prefix displayed.
Answer: A,D
NEW QUESTION # 148
Refer to the exhibit:
In which way does router R1 operate differently than router R2?
- A. R1 sends LSA types 1 and 2, while R2 sends type 1. 2. and 7 LSAs
- B. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs
- C. R1 sends LSA type 2 only and R2 sends LSA type 1 only
- D. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs
Answer: A
NEW QUESTION # 149
Refer to the exhibit.
CE1 and CE2 require connectivity to the internet through the ISP connected to PE3 What should an engineer configure to complete this task?
- A. PE2 must be configured to serve as a route reflector for PE3 routes learned from the internet. PE2 then shares the routes with CE1 and CE2.
- B. CE1 and CE2 must be configured to use a static default route with a next-hop of PE3 to reach internet routes.
- C. PE1 must be configured with an import route target in the CE1 VRF that matches the export route target for the internet VRF on PE3.
- D. CE1 and CE2 must be configured with a route distinguisher in the PE1 VRF that dynamically imports the route from the internet.
Answer: A
NEW QUESTION # 150
Refer to the exhibit:
Export statistics received do not include the BGP next hop.
Which statement about the NetFlow export statistics is true?
- A. To include the BGP next hop in the export statistics, those keywords must be included with the version 9 entry.
- B. Only the origin AS of the source router will be included in the export statistics.
- C. The origin AS and the peer-as will be included in the export statistics.
- D. Loopback 0 must be participating in BGP for it to be included in the export statistics.
Answer: A
NEW QUESTION # 151
Refer to the exhibit.
An engineer is configuring an administrative domain in the given multi-vendor environment with PIM-SM. Which feature must the engineer implement so that devices will dynamically learn the RP?
- A. BIDIR-PIM
- B. BSR
- C. Auto-RP
- D. SSM
Answer: B
NEW QUESTION # 152
Which configuration modifies Local Packet Transport Services hardware policies?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: D
NEW QUESTION # 153
After troubleshooting multiple outages on the network due to repeated configuration errors, the network architect asked an engineer to enable NETCONF to facilitate future configurations. The configuration must enable syslog messaging to record NETCONF notifications from each of the numerous devices on the network. Which configuration must the engineer apply?
- A. username cisco test taker privilege 15 password 0 ciscotest
aaa new-model
aaa authorization exec default local
snmp-server community ciscotest RW
netconf-yang cisco
logging history critical - B. username cisco test taker privilege 15 password 0 cisco test
aaa new-model
aaa authorization exec default local
snmp-server community cisco test RW
netconf-yang cisco-ia snmp-community-string ciscotest
logging history warnings - C. netconf-yang
username ciscotesttaker privilege 15 password 0 ciscotest
snmp-server community ciscotest RW
netconf-yang cisco-ia snmp-community-string ciscotest
logging history informational - D. netconf-yang
username ciscotesttaker privilege 15 password 0 ciscotest
aaa new-model
aaa authorization exec default local
snmp-server community ciscotest RW
netconf-yang cisco-ia snmp-community-string ciscotest
logging history debugging
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/netconf_programmability_configuration_guide.html
https://tools.ietf.org/html/rfc6241
NEW QUESTION # 154
Refer to the exhibit.
A network operator must configure CSR1 interlaces GigabitEihernet2 and GigabitEthemet to rewrite VLAN tags 12 and 21 for traffic between R1 and R2 respectively. Which configurator accomplishes this task?
A)
9B)
C)
- A. Option A
- B. Option B
- C. Option C
Answer: C
NEW QUESTION # 155
Refer to the exhibit.
Which the link aggregation configuration router is running on Cisco IOS XR software, which LACP interface configuration is needed to add the interface to the bundle?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 156
Refer to the exhibit.
Router 1 and router 2 are running OSPF Area 0. The router logs on both routers show that the LDP link has flapped. Which configuration must the engineer apply to the two routers to implement session protection on the link?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION # 157
Refer to the exhibit:
P3 and PE4 are at the edge of the service provider core and serve as ABR routers Aggregation areas are on either side of the core.
Which statement about the architecture is true?
- A. If each area is running its own IGP. the ABR routers must redistribute the IGP routing table into BGP
- B. If each area is running its own IGP. BGP must provide an end-to-end MPLS LSP
- C. To support seamless MPLS. TDP must be used as the label protocol
- D. To support seamless MPLS, the BGP route reflector feature must be disabled
Answer: B
NEW QUESTION # 158
Drag and drop the message types from the left onto the target field of the message originator on the right.
Answer:
Explanation:
NEW QUESTION # 159
Refer to me exhibit. An engineer started lo configure a router for OSPF.
Which configuration must me engineer perform on me router without changing any interface configuration so that the router establishes an OSPF neighbor relationship with its peer?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION # 160
Refer to the exhibit:
Router R1 and its peer R2 reside on the same subnet in the network, If does it make connections to R27
- A. R1 establishes UDP connections that are authenticated with a clear-text password
- B. R1 establishes UDP connections that are authenticated with an MD5 password
- C. R1 establishes TCP connections that are authenticated with a clear-text password
- D. R1 establishes TCP connections that are authenticated with an MD5 password
Answer: D
NEW QUESTION # 161
......
Get Ready to Pass the 350-501 exam Right Now Using Our CCNP Service Provider Exam Package: https://www.lead2passexam.com/Cisco/valid-350-501-exam-dumps.html
Enhance Your Career With Available Preparation Guide for 350-501 Exam: https://drive.google.com/open?id=1hOlxS3ngDTxDoKuH-_hD3hmnUrHhEZ6S