Latest VMware 2V0-41.20 PDF and Dumps (2021) Free Exam Questions Answers
Pass Your VCP-NV 2V0-41.20 Exam on Nov 05, 2021 with 92 Questions
Professional VMware NSX-T Data Center 2V0-41.20 Certification Path
Before applying for Professional VMware NSX-T Data Center 2V0-41.20 Certification, applicants are required to have at least 6 months of experience with Linux and KVM. Another 1 year experience with VMware vSphere and its command line is required as an official prerequisite for this exam. However, the recommended knowledge and experience required is discussed in detail in the “Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam” section of this document. Kindly refer to this section for more information.
NEW QUESTION 19
Which two choices are use cases for Distributed Intrusion Detection? (Choose two.)
- A. Use agentless antivirus with Guest Introspection.
- B. Identify security vulnerabilities in the workloads.
- C. Gain insight about micro-segmentation traffic flows.
- D. Quarantine workloads based on vulnerabilities.
- E. Identify risk and reputation of accessed websites.
Answer: B,D
NEW QUESTION 20
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get host-switch <Host-Switch-Name> tunnels
- B. get host-switch <Host-Switch-Name> tunnel status
- C. get transport-node tunnel state
- D. get transport-node tunnel status
Answer: A
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20host-switch%20%3Chost-switch-name%3E%20tunnels
NEW QUESTION 21
Which CLI command would an administrator use to allow syslog on an ESXi transport node when using the esxcli utility?
- A. esxcli network firewall ruleset set -r syslog -e true
- B. esxcli network firewall ruleset -e syslog
- C. esxcli network firewall ruleset set -a -e false
- D. esxcli network firewall ruleset set -r sysloq -e false
Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.2/nsxt_22_troubleshoot.pdf
Answer: A
NEW QUESTION 22
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. ipconfig
- B. tcpdump
- C. ifconfig
- D. debug
Answer: C
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-
NEW QUESTION 23
What are two supported N-VDS modes? (Choose two.)
- A. DPDK Datapath
- B. Secure Datapath
- C. Overlay Datapath
- D. Enhanced Datapath
- E. Standard Datapath
Answer: D,E
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D-CFBB31908D1C.html
NEW QUESTION 24
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Route Distribution
- B. Graceful Restart
- C. Local AS
- D. BGP Neighbors
- E. Route Aggregation
Answer: D,E
Explanation:
Explanation
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
NEW QUESTION 25
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service nsx-manager logging-level debug
- B. set service manager logging-level debug
- C. set service nsx-manager log-level debug
- D. set service manager log-level debug
Answer: B
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 26
What is the most restrictive NSX-T built-in role which will allow a user to apply configuration changes on a NSX Edge?
- A. Network Engineer
- B. Cloud Service Administrator
- C. NSX Administrator
- D. Network Operator
Answer: A
NEW QUESTION 27
Which discovery protocol is supported for hypervisor transport nodes?
- A. Link Layer Discovery Protocol
- B. Neighbor Discovery Protocol
- C. Cisco Discovery Protocol
- D. Adobe Real-time CDP
Answer: A
NEW QUESTION 28
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get host-switch <Host-Switch-Name> tunnels
- B. get host-switch <Host-Switch-Name> tunnel status
- C. get transport-node tunnel state
- D. get transport-node tunnel status
Answer: A
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 29
Which three functions require a Services Router (SR) component on an Edge node? (Choose three.)
- A. Gateway Firewall
- B. Virtual Private Network
- C. Distributed Routing
- D. Packet Forwarding
- E. Service Insertion
- F. Distributed Firewall
Answer: A,B,E
NEW QUESTION 30
Which CLI command shows syslog on NSX Manager?
- A. get log-file syslog
- B. show log manager follow
- C. get log-file auth.log
- D. /var/log/sysloq/syslog.log
Answer: A
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E
NEW QUESTION 31
An NSX administrator has been tasked with deploying a NSX Edge Virtual machine through an ISO image.
Which virtual network interface card (vNIC) type must be selected while creating the NSX Edge VM allow participation in overlay and VLAN transport zones?
- A. VMXNET3
- B. Flexible
- C. e1000
- D. VMXNET2
Answer: A
NEW QUESTION 32
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh dumpxml <VM Name> | grep interfaceid
- B. virsh list-interface <VM Name>
- C. virsh get-interface <VM Name>
- D. virsh show <VM Name> | grep interfaceid
Answer: A
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 33
A DevOps user has deployed a Kubernetes Pod in vSphere.
What does the term ClusterIP represent within NSX-T?
- A. Deployment of Distributed Router.
- B. Deployment of T0 and T1
- C. Deployment of T1 with NLB service.
- D. Deployment of Distributed Load Balancing service.
Answer: D
NEW QUESTION 34
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?
- A. Manually create external uplink interface and mark it as transit.
Reference: https://blogs.vmware.com/networkvirtualization/2018/01/nsx-t-routing-part-2.html/ - B. Automatically created when SR is initialized.
- C. Manually create a gateway interface and mark it as transit.
- D. Automatically created when DR is created.
Answer: B
NEW QUESTION 35
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can have a maximum of 8 edge nodes
- B. can have a maximum of 10 edge nodes
- C. must contain only one type of edge nodes (VM or bare metal)
- D. can contain multiple types of edge nodes (VM or bare metal)
- E. must have only active-active edge nodes
Answer: B,D
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-E8D72E198D5A.html
NEW QUESTION 36
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- B. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- C. Automatically created when Tier-1 is created.
- D. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
Answer: A
NEW QUESTION 37
When running nsxclion an ESXi host, which command will show the Replication mode?
- A. get logical-switch <Logical-Switch-UUID>
- B. get logical-switch status
- C. get logical-switch <Local-Switch-UUID> status
- D. get logical-switches
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 38
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time.
Which CLI command disables the nsxcli time out value on NSX Manager?
- A. set cli-timeout 0
- B. set cli-timeout 1
- C. set cli-timeout disabled
- D. set cli-timeout enabled
Answer: A
Explanation:
Explanation
"
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
https://www.virten.net/2020/06/quick-tip-remove-nsx-t-ssh-and-http-session-timeout/
NEW QUESTION 39
Which three can an administrator define in a transport node profile? (Choose three.)
- A. Uplink Profile
- B. Segment Profile
- C. Logical Router
- D. N-VDS switch configuration
- E. VDS switch configuration
- F. Segment
Answer: A,D,E
NEW QUESTION 40
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: B,D
NEW QUESTION 41
What are three characteristics of a transport zone? (Choose three.)
- A. configured with a Single N-VDS
- B. configured with multiple N-VDS
- C. optional for creating a segment
- D. defines the scope and reachability of a Segment
- E. defines the potential reach of transport nodes
Answer: A,D,E
NEW QUESTION 42
......
The benefit of obtaining the Professional VMware NSX-T Data Center 2V0-41.20 Exam Certification
- If the applicant has the desire to transfer into a company to a higher-paying role. As always, this credential will help.
- VMware certified professionals are able to provide higher level of customer satisfaction
- VMware certifications improve earning
- VMware certifications improve job productivity
- VMware certifications echance credibility of certified professionals
- VMware certified professionals are able to manage complex projects and issues
- VMware certifications improve career prospects
- When an company recruits or promotes an employee, human resources are responsible for the decision. Now, although applicants may have an IT history, they make their decisions in a way that records several different variables. One thing is that applicants, like the VMware Certified Advanced Professional, have formal qualifications.
2V0-41.20 Dumps for VCP-NV Certified Exam Questions & Answer: https://www.lead2passexam.com/VMware/valid-2V0-41.20-exam-dumps.html
2V0-41.20 Free Exam Study Guide! (Updated 92 Questions): https://drive.google.com/open?id=1Wg-2X8begCU5llI5R5ib7lUs3prlMOCw