Oct-2022 FREE Cisco 300-410 PRACTICE QUESTIONS AND ANSWERS UPDATES
DEMO FREE BEFORE YOU BUY 300-410 DUMPS
What is the exam cost of Cisco 300-410 Exam
The exam cost of Cisco 300-410 Exam are $300 USD
NEW QUESTION 211
Refer to the exhibit.
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
- A. Issue the eigrp stub command on R2.
- B. Issue the no eigrp stub command on R2.
- C. Issue the no eigrp stub command on R1.
- D. Issue the eigrp stub command on R1.
Answer: C
NEW QUESTION 212
Exhibit:
Which action resolves the authentication problem?
- A. Configure the user name on the TACACS+ server
- B. Configure the same password between the TACACS+ server and router.
- C. Configure the TCP port 49 to be reachable by the router
- D. Configure the UDP port 1812 to be allowed on the TACACS+ server
Answer: B
Explanation:
Explanation
From the last line of the output, we notice that the result was "Invalid AUTHEN packet". Therefore something went wrong with the username or password.
NEW QUESTION 213
A company is expanding business by opening 35 branches over the Internet. A network engineer must configure DMVPN at the branch routers to connect with the hub router and allow NHRP to add spoke routers securely to the multicast NHRP mappings automatically Which configuration meets this requirement at the hub router?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: A
NEW QUESTION 214
What are two purposes of using IPv4 and VPNv4 address-family configurations in a Layer 3 MPLS VPN?
(Choose two.)
- A. The VPNv4 address is used to advertise the MPLS VPN label.
- B. MP-BGP is used to allow overlapping IPv4 addresses between customers to advertise through the network.
- C. The IPv4 address is needed to tag the MPLS label.
- D. RD is prepended to the IPv4 route to make it unique.
- E. The VPNv4 address consists of a 64-bit route distinguisher that is prepended to the IPv4 prefix.
Answer: B,D
NEW QUESTION 215
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
NEW QUESTION 216
When provisioning a device in Cisco DNA Center, the engineer sees the error message "Cannot select the device. Not compatible with template.". What is the reason for the error?
- A. The changes to the template were not committed
- B. The software version of the template is different from the software version of the device
- C. The tag that was used to filter the templates does not match the device tag.
- D. The template has an incorrect configuration.
Answer: C
NEW QUESTION 217
Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 218
Drag and drop the MPLS VPN device types from the left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION 219
Refer to the exhibit.
An engineer is trying to connect to a device with SSH but cannot connect. The engineer connects by using the console and finds the displayed output when troubleshooting. Which command must be used in configuration mode to enable SSH on the device?
- A. no ip ssh disable
- B. crypto key generate rsa
- C. ip ssh version 2
- D. ip ssh enable
Answer: B
NEW QUESTION 220
Drag and drop the IPv6 first hop security device roles from the left onto the corresponding descriptions on the right.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/security/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Security_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Security_Configuration_Guide_7x_chapter_011011.pdf
NEW QUESTION 221
Drag and drop the packet types from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 222
Which protocol is used to determine the NBMA address on the other end of a tunnel when mGRE is used?
- A. IPsec
- B. MP-BGP
- C. OSPF
- D. NHRP
Answer: D
Explanation:
Section: VPN Technologies
NEW QUESTION 223
An engineer is trying to copy an IOS file from one router to another router by using TFTP Which two actions are needed to allow the file to copy? (Choose two.)
- A. TFTP is not supported in recent IOS versions, so an alternative method must be used.
- B. Copy the file to the destination router with the copy tftp: flash: command
- C. Enable the TFTP server on the source router with the tftp-server flash:<filename> command.
- D. Configure the TFTP authentication on the source router with the tftp-server authentication local command.
- E. Configure a user on the source router with the username tftp password tftp command.
Answer: C,D
NEW QUESTION 224
Refer to the exhibit.
ISP 1 and ISP 2 directly connect to the Internet. A customer is tracking both ISP links to achieve redundancy and cannot see the Cisco IOS IP SLA tracking output on the router console. Which command is missing from the IP SLA configuration?
- A. Start-time immediately
- B. Start-time now
- C. Start-time 0
- D. Start-time 00:00
Answer: B
NEW QUESTION 225
Refer to the exhibit.
A junior engineer updated a branch router configuration. Immediately after the change, the engineer receives calls from the help desk that branch personnel cannot reach any network destinations. Which configuration restores service and continues to block 10.1.1.100/32?
- A. ip prefix-list 102 seq 5 permit 0.0.0.0/32 le 32
- B. route-map FILTER-IN permit 20
- C. route-map FILTER-IN deny 5
- D. ip prefix-list 102 seq 15 permit 0.0.0.0/32 le 32
Answer: B
NEW QUESTION 226
Refer to Exhibit.
Traffic from the branch network should route through HQ R1 unless the path is unavailable. An engineer tests this functionality by shutting down interface on the BRANCH router toward HQ_R1 router but 192.168.20.0/24 is no longer reachable from the branch router. Which set of configurations resolves the issue?
- A. BRANCH(config)# ip sla 1
BRANCH(config-ip-sla)# icmp-echo 172.16.35.2 - B. HQ_R2(config)# ip sla responder
HQ_R2(config)# ip sla responder icmp-echo 172.16.35.5 - C. BRANCH(config)# ip sla 1
BRANCH(config-ip-sla)# icmp-echo 172.16.35.1 - D. HQ_R1(config)# ip sla responder
HQ_R1(config)# ip sla responder icmp-echo 172.16.35.2
Answer: A
Explanation:
In the configuration above, the engineer has made a mistake as he was tracking 172.16.35.6 (the backup path) instead of tracking the main path (172.16.35.2). Therefore,when he shut down the main path, the track 1 was still up so traffic still went through the main path -> it failed.
To fix this issue, we just need to correct the tracking interface of the main path.
NEW QUESTION 227
......
Latest Cisco 300-410 Dumps with Test Engine and PDF: https://www.lead2passexam.com/Cisco/valid-300-410-exam-dumps.html
Cisco 300-410 Exam Dumps Are Essential To Get Good Marks: https://drive.google.com/open?id=1ShD4P4DhEa1Dw4LtoHCg6-smYyjIVVRV